Please rotate your device!

Skip navigation

Lifting Magnets
Lifting Magnets

Hand-operated or electropermanent lifting magnets lift and transport flat or round work pieces. Size and characteristics of the load – thin or thick – will not be any problem for you.
- flat or round work pieces
- up to 15.000 kg
- compact and sturdy
Clamping Magnets
Clamping magnets

Maximum adhesive force for safe processing
with unimagined production reserves:
- a 5-sided machining in one clamp
- minimum set-up times and increase of productivity
- increase of tool useful life and process safety
Magnetic tools
Catalogues / Downloads

Do you have any questions or do you require consultation? +49 (0) 7171 92505-0 info@assfalg-metal.com

Switch to
Assfalg Metal Cutting

Switch to
Assfalg Magnets

Switch to
Assfalg Machines

Switch to
Assfalg GmbH

Skip navigation

Handheld Machines
- Hand Deburrer
  - Mango II | Universal Hand Tool A | GLO-BURR
- Pneumatic- and Electric Grinder
- Chamfering Machine, Deburring Machine, handheld
  - ASO 760-2
- Chamfering Machine, handheld
  - ASO 300 | ASO 310
  - ASO 312 | ASO 313
    The compact and robust, handheld Chamfering Machines are particularly suitable for chamfering flat work pieces. Stable, screwed cutting inserts guarantee long useful life.
  - SMA 20-AEF | SMA 20-APF
    The pneumatic, handheld chamfering machines are a perfect
    solution for deburring edges and contours. The ergonomic handle (two-hand
    operation) enables stable and safe deburring.
  - SMA 30-BER | SMA 30-BPV
    The pneumatic, handheld chamfering machines are the ideal solution for
    deburring and chamfering internal and external edges, contours and bores.
    A flywheel mass allows soft cutting and high cutting efficiency.
  - SMA 40-BER | SMA 40-APV
    The handheld chamfering machine for straight internal and external edges,
    contours and bores cuts very smoothly with low vibration due to the spring
    technology. The milling cutter quick-change system enables easy setting-up
    to other chamfer angles.
  - SMA 50-BEV | SMA 50-BPV
    The robust, powerful and very durable edge milling machine for hard use. Thanks to the protection and damping technology, large bevels can be milled even easier, safer and more economical.
  - SMA 60-BHV
    The robust, powerful and very durable edge milling machine for hard use. Thanks to the protection and damping technology, large bevels can be milled even easier, safer and more economical.
Handheld Machines

Handheld edge milling machines for the flexible jobs from hand deburrer to the edge milling machine for weld seam preparation.
Mobile & Stationary
- Overview
  - KBM 18
  - Quicker | Maxiquicker
  - ASO 900 | ASO 900 Plus | ASO 900 Plus-Bigger
    Chamfering long and widespread workpieces at angles from 15° – 60° is carried out by the chamfering machine easily. This machine is very strainable and has shown its strength for each material.
  - ASO 930 | ASO 930 Plus
    With the ASO 930 | ASO 930 Plus milling the front- and bottom side on the workpiece is now possible. The turning of the workpiece is no longer necessary.
  - ASO 910
  - ASO 920
Stationary Machines
- Edge Grinding Machines
- Edge Milling Machines for Straight Edges
  - Speedy Prisma 210-P | Speedy Prisma 210-PSL
    This deburring machines are easy, sturdy table machines with a prismatic sliding carriage for efficient and precise processing of longitudinal edges and small workpieces.
  - FS 5
  - ASO 850-K
    The sturdy and easy chamfering machine is designed for deburring and edge cutting of big workpieces from 2mm thickness. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering up to 3mm x 45° in a section.
  - ASO 650 | ASO 650-WSL
    Deburring and chamfering of big workpieces is an easy job. Rounding of edges in use with radius inserts is also possible. Speed control is very useful when processing aluminum or stainless steel.
  - ASO 160-M | ASO 160-MSL
  - WKF 170
  - MMB 400B | MMB 500L | MMB 600C
    The machine show as well a high abrading power as a high chamfer quality. It is mainly used for welding bevels up to 25°-60°, but also for optical bevels on straight edges, end of tubes and round steel plates.
- Edge Milling Machines for Contours
  - Speedy Kontur 270-K | 270-KSL | 320-K | 320-KSL
    The stationary edge and contour beveling machines are perfectly suitable for deburring and chamfering internal and external edges of flat workpieces. The machines are compact and handy table devices which are ideally used also besides CNC machines.
  - KKE 1 | KKE 2
  - ASO 600-ASL
  - KKF 4-SL
  - KKF 3-SL
- Stone Vibration Deburring and Slide Grinding Machines
  - TV 95-SL
    As large as a washing machine, the through slide grinding machine with a capacity of 95 l is our standard machine and ideal for prototypes and small series.
  - TV 15-SL | TV 40-SL | TV 100-SL | TV 200-SL
    The trough slide grinding machines have a capacity from 18 to 240 l. They make it possible to process workpieces with different shapes and sizes. Sensitive workpieces can be contactless processed by means of chambers or workpiece carriers.
  - ASM 18 | ASM 60
    The centrifugal plants ASM are ideal for small parts and has a tenfold to twentyfold better processing intensity in comparison with conventional vibratory finishing machines. The centrifugal plant can be planned as a single device up to a fully automatic plant.
  - RV 40-SL | RV 120-SL | RV 220-SL | RV 420-SL
    The rotary vibrators can be universally used for deburring, rounding edges, cleaning up to polishing, that is for small parts. As individual plant or in combination with further post-treatment plants, such as dryer or separator, the rotary vibrator becomes the circular vibrator for the fully automatic sliding sharpening centre.
  - RT 200 | RT 400 | RT 600 | RT 800
  - MZ 90
    The centrifuge is a small, space-saving individual plant for the treatment of process water. The dirty particles are separated with a 2000-fold acceleration of gravity (g) from the process water.
- Drive unit
  - UA 5
    Whether grinding, polishing, brushing or deburring - the universal drive engine Starmax UA 5 is used in all materials. A wide variety of tools makes the machine very flexible and indispensable in your production.
- Tool Grinding Machines
  - EDG 213 | EDG 1226
  - Neutrix
Stationary Machines

Chamfering machines for small workpieces to the weld seam preparation on flat steels.
Catalogues | Downloads

SMA 30-BER | SMA 30-BPV

SMA 30-BER | SMA 30-BPV - Manuals & Downloads

Machines

SMA 30-BER, SMA 30-BPV EN 2020.pdf (1.5 MiB, PDF)
SMA 30-BER, SMA 30-BPV DE 2020.pdf (144.7 KiB, PDF)

Interesting products

ASO 600-ASL

The small and compact machine chamfers or rounds edges precisely, safely and with ease. It leaves chatter-free bevels a…

view Product

KKF 4-SL

The spindle bearings mounted under pre-stress lend high-precision concentricity to the KKF 4-SL. It can be used both fu…

view Product

Productfinder

Do you require assistance?

1. What do you want to do?

2. Processing

3. How much load should the magnet lift?

2. Processing

Shape of the workpiece

1. What do you want to do?

2. Straight edges or contours

3. Chamfer size

SMA 30-BER | SMA 30-BPV - Manuals & Downloads

Machines

Interesting products

Assfalg GmbH