Please rotate your device!

Skip navigation

Lifting Magnets
Lifting Magnets

Hand-operated or electropermanent lifting magnets lift and transport flat or round work pieces. Size and characteristics of the load – thin or thick – will not be any problem for you.
- flat or round work pieces
- up to 15.000 kg
- compact and sturdy
Clamping Magnets
Clamping magnets

Maximum adhesive force for safe processing
with unimagined production reserves:
- a 5-sided machining in one clamp
- minimum set-up times and increase of productivity
- increase of tool useful life and process safety
Magnetic tools
Catalogues / Downloads

Do you have any questions or do you require consultation? +49 (0) 7171 92505-0 info@assfalg-metal.com

Switch to
Assfalg Metal Cutting

Switch to
Assfalg Magnets

Switch to
Assfalg Machines

Switch to
Assfalg GmbH

Skip navigation

Hand-held Machines
- Hand Deburrer
  - Mango II | Universal Hand Tool A | GLO-BURR
- Pneumatic- and Electric Grinder
- Chamfering Machine, Deburring Machine, handheld
  - ASO 750 | ASO 760-2
- Chamfering Machine, handheld
  - ASO 300 | ASO 310
  - ASO 312 | ASO 313
    The compact and robust, handheld Chamfering Machines are particularly suitable for chamfering flat work pieces. Stable, screwed cutting inserts guarantee long useful life.
Hand-held Machines

Hand-held edge milling machines for the flexible jobs from hand deburrer to the edge milling machine for weld seam preparation.
Mobile & Stationary
- Overview
  - KBM 18
  - Quicker | Maxiquicker
  - ASO 900 | ASO 900 Plus | ASO 900 Plus-Bigger
    Chamfering long and widespread workpieces at angles from 15° – 60° is carried out by the chamfering machine easily. This machine is very strainable and has shown its strength for each material.
  - ASO 930 | ASO 930 Plus
    With the ASO 930 | ASO 930 Plus milling the front- and bottom side on the workpiece is now possible. The turning of the workpiece is no longer necessary.
  - ASO 910
  - ASO 920
Stationary Machines
- Edge Grinding Machines
- Edge Milling Machines for Straight Edges
  - Speedy Prisma 210-P | Speedy Prisma 210-PSL
    This deburring machines are easy, sturdy table machines with a prismatic sliding carriage for efficient and precise processing of longitudinal edges and small workpieces.
  - FS 5
  - ASO 850-K
    The sturdy and easy chamfering machine is designed for deburring and edge cutting of big workpieces from 2mm thickness. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering up to 3mm x 45° in a section.
  - ASO 650 | ASO 650-WSL
    Deburring and chamfering of big workpieces is an easy job. Rounding of edges in use with radius inserts is also possible. Speed control is very useful when processing aluminum or stainless steel.
  - ASO 160-M | ASO 160-MSL
  - WKF 170
  - MMB 400B | MMB 500L | MMB 600C
    The machine show as well a high abrading power as a high chamfer quality. It is mainly used for welding bevels up to 25°-60°, but also for optical bevels on straight edges, end of tubes and round steel plates.
- Edge Milling Machines for Contours
  - Speedy Kontur 270-K | 270-KSL | 320-K | 320-KSL
    The stationary edge and contour beveling machines are perfectly suitable for deburring and chamfering internal and external edges of flat workpieces. The machines are compact and handy table devices which are ideally used also besides CNC machines.
  - KKE 1 | KKE 2
  - ASO 600-ASL
  - KKF 4-SL
  - KKF 3-SL
- Stone Vibration Deburring and Slide Grinding Machines
  - TV 95-SL
    As large as a washing machine, the through slide grinding machine with a capacity of 95 l is our standard machine and ideal for prototypes and small series.
  - TV 15-SL | TV 40-SL | TV 100-SL | TV 200-SL
    The trough slide grinding machines have a capacity from 18 to 240 l. They make it possible to process workpieces with different shapes and sizes. Sensitive workpieces can be contactless processed by means of chambers or workpiece carriers.
  - ASM 18 | ASM 60
    The centrifugal plants ASM are ideal for small parts and has a tenfold to twentyfold better processing intensity in comparison with conventional vibratory finishing machines. The centrifugal plant can be planned as a single device up to a fully automatic plant.
  - RV 40-SL | RV 120-SL | RV 220-SL | RV 420-SL
    The rotary vibrators can be universally used for deburring, rounding edges, cleaning up to polishing, that is for small parts. As individual plant or in combination with further post-treatment plants, such as dryer or separator, the rotary vibrator becomes the circular vibrator for the fully automatic sliding sharpening centre.
  - RT 200 | RT 400 | RT 600 | RT 800
  - MZ 90
    The centrifuge is a small, space-saving individual plant for the treatment of process water. The dirty particles are separated with a 2000-fold acceleration of gravity (g) from the process water.
- Power Engine
  - UA 5
    Whether grinding, polishing, brushing or deburring - the universal drive engine Starmax UA 5 is used in all materials. A wide variety of tools makes the machine very flexible and indispensable in your production.
- Tool Grinding Machines
  - EDG 213 | EDG 1226
  - Neutrix
Stationary Machines

Chamfering machines for small workpieces to the weld seam preparation on flat steels.
Catalogues | Downloads

KKE 1 | KKE 2

KKE 1

Beveling Machine for Contours

Submit a request

deburring-machine-kke1-with-prism-attachment-for-straight-edges

KKE 2

Beveling Machine for Contours

Submit a request

KKE 1 | KKE 2 - Beveling Machine for Contours

Straight edges, bores, long holes, grooves are chamfered precisely, fast and easily. V-prism attachment for the processing of straight edges rounds off the whole package. The big help for a small price.

>> Overview of all Types Incl. Technological Data

The Ace for Metal

Solutions and tools for stationary and
mobile metalworking.

KKE 2

ADVANTAGES

Internal and external contours can be chamfered and rounded
Dimensional accuracy thanks to ball bearing guide or guide ruler
Very good chamfer quality
Long tool life of the t.c cutters
Compact handy tabletop unit next to the CNC milling machine and CNC lathe
Precise chamfer adjustment
Speed control for processing different materials
Chamfer angle can be changed due to contour cutter with different point angles
Fast tool change

The long tool life is a great advantage of this small, handy table machine. The V-Block for processing of straight edges completes the overall package of this beveling machine KKE 1 / KKE 2.

Application Possibilities

Minimum workpiece thickness 1 mm
Can be used for steel, hardened steel, aluminium, brass, copper, plastics, from soft plastic to acrylic glass, wood and much more
Chamfering or rounding of external and internal contours

In all materials the contour chamfering machine KKE 1 / KKE 2 is usable for slightly work processes. With the right tool it`s very easy to make bevels or radii on the workpieces.

Gallery

Interested?

Are you interested in one of our products or do you wish for detailed counselling? Do not hesitate to contact us via e-Mail or via telephone.

Our experts are happy to help you!

Inquire

+49 (0) 7171 92505-0

Options

V-prism attachment with extractor for straight edges
Guide finger for stable guiding of workpieces with external contours

Delivery contents

Guide ruler, box wrench 17 mm, union nut, allen key 3 mm, collet ø 6 mm,
Open-ended wrench 14 mm
Insert ring with borehole ø 8 mm
Prism with extraction socket, insert ring with borehole ø 12 mm, collet ø 8 mm, allen key 5 mm (only for KKE 2)
Operating instructions

Download our catalogue now

You want to learn more about clamping and lifting magnets? Out catalogues offer a wide overview of out entire assortment. Download now!

Catalogue 2019 Deburring, Chamferring

Productfinder

Do you require assistance?

1. What do you want to do?

2. Processing

3. How much load should the magnet lift?

2. Processing

Shape of the workpiece