Please rotate your device!

Skip navigation

Lifting Magnets
Lifting Magnets

Hand-operated or electropermanent lifting magnets lift and transport flat or round work pieces. Size and characteristics of the load – thin or thick – will not be any problem for you.
- flat or round work pieces
- up to 15.000 kg
- compact and sturdy
Clamping Magnets
Clamping magnets

Maximum adhesive force for safe processing
with unimagined production reserves:
- a 5-sided machining in one clamp
- minimum set-up times and increase of productivity
- increase of tool useful life and process safety
Magnetic tools
Catalogues / Downloads

Skip navigation

Current
Products
Company
Contact
Machines
- Hand-held Machines
  Hand-held Machines
  
  Hand-held edge milling machines for the flexible jobs from hand deburrer to the edge milling machine for weld seam preparation.
- Mobile & Stationary
  - Overview
- Stationary Machines
  Stationary Machines
  
  Chamfering machines for small workpieces to the weld seam preparation on flat steels.
- Catalogues | Downloads
Magnets
- Lifting Magnets
  Lifting Magnets
  
  Hand-operated or electropermanent lifting magnets lift and transport flat or round work pieces. Size and characteristics of the load – thin or thick – will not be any problem for you.
  - flat or round work pieces
  - up to 15.000 kg
  - compact and sturdy
- Clamping Magnets
  Clamping magnets
  
  Maximum adhesive force for safe processing
  with unimagined production reserves:
  - a 5-sided machining in one clamp
  - minimum set-up times and increase of productivity
  - increase of tool useful life and process safety
- Magnetic tools
- Catalogues / Downloads
Tools
- Carbide cutters
  High efficient processing of metal.
- Carbide tools
  - Solid carbide high performance driller with/ without internal cooling
  - HPC sinker
  For universal operation.
- Carbide deburring
  - Deburring cutters
  For all contour chamfering machines which are available on the market of any makes.
- Threading tools
  - Thread cutters
  - Thread shaper
  Threading tools for an universal use. For hard processing, please request our special thread taps.
- Catalogues / Downloads

Do you have any questions or do you require consultation? +49 (0) 7171 92505-0 info@assfalg-metal.com

Switch to
Assfalg Metal Cutting

Switch to
Assfalg Magnets

Switch to
Assfalg Machines

Switch to
Assfalg GmbH

Skip navigation

Hand-held Machines
- Hand Deburrer
  - Mango II | Universal Hand Tool A | GLO-BURR
- Pneumatic- and Electric Grinder
- Chamfering Machine, Deburring Machine, handheld
  - ASO 750 | ASO 760-2
  - ASO 760-3
- Chamfering Machine, handheld
  - ASO 300 | ASO 310
  - SMA 20-EF24 | SMA 20-PF25
    The electric and pneumatic, handheld chamfering machines are an ideal solution for deburring edges and contours. The ergonomic handle grip (two-hand operation) enables stable and safe deburring.
  - SMA 30-EVR24 | SMA 30-PV25
    The pneumatic, handheld chamfering machines are an ideal solution for deburring internal and external edges and contours as well as bores. A wide range of accessories allows a stable, secure and vibration-free-chamfering of different materials.
  - ASO 312 | ASO 313
    The compact and robust, handheld Chamfering Machines are particularly suitable for chamfering flat work pieces. Stable, screwed cutting inserts guarantee long useful life.
  - SMA 60 BEM-V
    The robust, powerful and very durable edge milling machine for hard use. Thanks to the protection and damping technology, large bevels can be milled even easier, safer and more economical.
  - SMA 40-E | SMA 50 BEM-V | SMA 40-P
    Apart from the rapid chamfer retooling system for efficient and economic use, the cha,fering machines have also a spring technology for flat internal and external edges, contours and bores for vibration-free operation, this ensures a longer tool life.
Hand-held Machines

Hand-held edge milling machines for the flexible jobs from hand deburrer to the edge milling machine for weld seam preparation.
Mobile & Stationary
- Overview
  - KBM 18
  - Quicker | Maxiquicker
  - ASO 900 | ASO 900 Plus | ASO 900 Plus-Bigger
    Chamfering long and widespread workpieces at angles from 15° – 60° is carried out by the chamfering machine easily. This machine is very strainable and has shown its strength for each material.
  - ASO 930 | ASO 930 Plus
    With the ASO 930 | ASO 930 Plus milling the front- and bottom side on the workpiece is now possible. The turning of the workpiece is no longer necessary.
  - ASO 910
  - ASO 920
Stationary Machines
- Edge Grinding Machines
- Edge Milling Machines for Straight Edges
  - Speedy Prisma 210-P | Speedy Prisma 210-PSL
    This deburring machines are easy, sturdy table machines with a prismatic sliding carriage for efficient and precise processing of longitudinal edges and small workpieces.
  - FS 5
  - ASO 850-K
    The sturdy and easy chamfering machine is designed for deburring and edge cutting of big workpieces from 2mm thickness. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering up to 3mm x 45° in a section.
  - ASO 650 | ASO 650-WSL
    Deburring and chamfering of big workpieces is an easy job. Rounding of edges in use with radius inserts is also possible. Speed control is very useful when processing aluminum or stainless steel.
  - ASO 160-S | ASO 160-SSL
    Whether individual parts or series production, the ASO 160-S/SSL is an indispensable assistant in all metalworking operations.
    You can easily process both small parts and bars.
    The optically polished looking chamfer surfaces represent the skill of the machine.
  - ASO 160-M | ASO 160-MSL
  - WKF 170
  - MMB 400 | MMB 500 | MMB 600
    The machine show as well a high abrading power as a high chamfer quality. It is mainly used for welding bevels up to 25°-60°, but also for optical bevels on straight edges, end of tubes and round steel plates.
- Edge Milling Machines for Contours
  - Speedy Kontur 270-K | 270-KSL | 320-K | 320-KSL
    The stationary edge and contour beveling machines are perfectly suitable for deburring and chamfering internal and external edges of flat workpieces. The machines are compact and handy table devices which are ideally used also besides CNC machines.
  - KKE 1 | KKE 2
  - ASO 600-A | ASO 600-ASL
  - KKF 4 | KKF 4-SL
  - KKF 3
- Stone Vibration Deburring and Slide Grinding Machines
  - TV 95-SL
    As large as a washing machine, the through slide grinding machine with a capacity of 95 l is our standard machine and ideal for prototypes and small series.
  - TV 15-SL | TV 40-SL | TV 100-SL | TV 200-SL
    The trough slide grinding machines have a capacity from 18 to 240 l. They make it possible to process workpieces with different shapes and sizes. Sensitive workpieces can be contactless processed by means of chambers or workpiece carriers.
  - ASM 18 | ASM 60
    The centrifugal plants ASM are ideal for small parts and has a tenfold to twentyfold better processing intensity in comparison with conventional vibratory finishing machines. The centrifugal plant can be planned as a single device up to a fully automatic plant.
  - RV 40-SL | RV 120-SL | RV 220-SL | RV 420-SL
    The rotary vibrators can be universally used for deburring, rounding edges, cleaning up to polishing, that is for small parts. As individual plant or in combination with further post-treatment plants, such as dryer or separator, the rotary vibrator becomes the circular vibrator for the fully automatic sliding sharpening centre.
  - RT 200 | RT 400 | RT 600 | RT 800
  - MZ 35 | MZ 90
    The centrifuge is a small, space-saving individual plant for the treatment of process water. The dirty particles are separated with a 2000-fold acceleration of gravity (g) from the process water.
- Power Engine
  - UA 5
    Whether grinding, polishing, brushing or deburring - the universal drive engine Starmax UA 5 is used in all materials. A wide variety of tools makes the machine very flexible and indispensable in your production.
- Tool Grinding Machines
  - EDG 213 | EDG 1226
  - Neutrix
Stationary Machines

Chamfering machines for small workpieces to the weld seam preparation on flat steels.
Catalogues | Downloads

UA 5

UA 5 - Manuals & Downloads

Machines

UA 5 EN.pdf (91.0 KiB, PDF)
UA 5 DE.pdf (111.5 KiB, PDF)
UA 5 FR.pdf (341.7 KiB, PDF)
UA 5 ES.pdf (92.0 KiB, PDF)

Accessoires

Accessories UA 5 DE.pdf (196.6 KiB, PDF)
Accessories UA 5 EN.pdf (195.2 KiB, PDF)
Accessories UA 5 ES.pdf (809.7 KiB, PDF)

Interesting products

DHB 330 | DHB 520

The pneumatic hand belt grinder machines are used for the surface-, contour- and shape cut. The 360° swivelling grindi…

view Product

TV 95-SL

As large as a washing machine, the through slide grinding machine with a capacity of 95 l is our standard machine and i…

view Product

Elift

The hand-operated Permanent Lifting Magnet Elift (formerly SK-I) is the perfect and fully developed solution for moving…

view Product

Productfinder

Do you require assistance?

1. What do you want to do?

2. Processing

3. How much load should the magnet lift?

2. Processing

Shape of the workpiece

1. What do you want to do?

2. Straight edges or contours

3. Chamfer size

UA 5 - Manuals & Downloads

Machines

Accessoires

Interesting products

Assfalg GmbH