The circular dryers RT are used for drying, brightening, repolishing and degreasing workpieces. These are normally used in connection with vibratory finishing machines.
| Model | Motor |
Energy | Tub diameter (F=∅) [mm] |
|---|---|---|---|
| RT-200 | 1,1 kW | 1.500 rpm | 400 V, 50 Hz | 1000 |
| RT-400 | 1,1 kW | 1.500 rpm |
400 V, 50 Hz | 1200 |
| RT-600 | 1,1 kW | 1.500 rpm |
400 V, 50 Hz | 1400 |
| RT-800 | 4,0 kW | 1.500 rpm |
400 V, 50 Hz | 1420 |
The circular dryers RT are used for stainless drying of all types of workpieces. By using the hot-air blower or the indirect heating through heating rods below the tub, a uniform drying of the workpieces and the drying granulate is ensured. The additional advantage is that it brightens, repolishes and degreases workpieces.
The noise protection cover is permanently installed when using the hot-air blower. The granulate, fill level and workpieces can be controlled through 2 service-flaps. The advantage of this version is the immediate availability of the system and the integrated dust extraction.
Indirect heating by heating rods is needed for a heat-up phase of approximately 30 minutes. The easily removable dust protection hood reduces dust and noise and allows for a quick intervention in the drying process. Both versions can be configured as individual systems in combination with a new vibratory finishing machine or as a module for an existing vibratory finishing machine.
The drying medium and the workpieces are brought into a rotational movement through a generated vibration. The desired drying or post-treatment process are created through the contact of the drying medium and workpieces.
The workpieces are automatically screened out of the dryer and transported from the device through the optional manual or pneumatic separation equipment.
The inner side of the tub can be separated from the dryer with a PU-coating for sensitive workpieces. An outlet plug is integrated for the quick change of drying medium.
Vibratory grinding (also known as trowalising) is an industrial process for surface treatment of workpieces. In this process, workpieces are moved together with abrasive media (so-called chips) and often also a special compound in a container. The relative movement between the workpieces and the abrasive media removes material and smoothes the surfaces.
Vibratory grinding is a cost-effective, versatile method for improving the surface quality and functionality of components.
Vibratory finishing is suitable for numerous materials such as steel, stainless steel, aluminium, copper, brass, plastic and even ceramics.
Choosing the right vibratory finishing machine depends on various factors:
Choosing the right process media depends on various factors:
Yes, a water treatment system makes sense when using compounds. It extends the service life of the abrasive media, reduces operating costs and fulfils environmental requirements.
In industry, deburring includes methods for removing edges, splinters and fraying on workpieces, which are known as burrs. Burrs occur during various production techniques such as stamping, milling or turning and appear as unwanted changes in shape on the component, often in the form of sharp edges.
Deburring is necessary to ensure the functionality and quality of workpieces. Burrs can make further processing more difficult and lead to parts that no longer fit together or reduce the efficiency of the end product. In addition, burrs on the edges can cause considerable risk of injury during machining and handling.
There are various methods such as manual deburring, mechanical deburring, thermal deburring, electrochemical deburring and grinding. The choice of method depends on the requirements and the nature of the workpiece.
The selection of the right deburring machine depends on the type of material, workpiece size, burr hardness and the desired surface quality. Our experts will be happy to help you select the most suitable machine.
Assfalg offers a wide range of machines and tools for different applications:
This variety enables Assfalg to fulfil almost every requirement in deburring and surface finishing.
Take the next step and recognise the benefits of precision steel solutions for your company.
Or simply give us a call:
+49 (0)7171 92505-0
Buchstraße 149
73525 Schwäbisch Gmünd
You can also find us on
