Demagnetising plates ENTMAG P

With the ENTMAG plates, single and series parts free of residual fields can be ensured in an energy and process-optimised manner by continuous or manual passage.

Back to Overview

Dimensions [mm]
Dimensions [mm]: 200 x 150 x 100
Active area [mm]: 200 x 150
Voltage: 230 V

Technical data

Model	Dimensions [A x B x H]	Active area	Weight
	[mm]	[mm]	[kg]
HD 123	123 x 83 x 83	120 x 60	1,7
HD 200	193 x 139 x 109	150 x 110	7
HD 380	420 x 220 x 135	320 x 160	30
HD 500	508 x 304 x 220	400 x 220	72

Show complete technical data

ENTMAG demagnetising plates are a simple and cost-effective solution for demagnetising individual and series parts of small and medium size.
The devices demagnetise up to a maximum distance of 60 mm.
The workpieces are demagnetised individually manually or via a conveyor system - accumulations must be avoided.

Why demagnetizing?

All the ferrous and ferromagnetic materials are capable of creating magnetic zones. This may occur with the raw material storage, with magnetic crack and hardness tests, cold forming, chip cutting, measuring or magnetic clamping and lifting.

Basically, magnetism is not harmful, but may prove interfering with further processing.

While demagnetizing, the magnetic field in the workpiece gets neutralised. The workpiece is magnetically neutral. The demagnetizing effect can be obtained by intense heating or a very strong external magnetic field. After demagnetization, the magnetic forces in the workpiece have disappeared. The magnetic field can be restored through remagnetization.