The segmented support modules effect as pole extension with magnetic clamping plates.
Model |
Dimensions [L x B x H] | Pole orientation |
---|---|---|
[mm] |
||
950 (pair) |
60 x 75 x 30 |
length |
950 v Prisma (pair) |
50 x 100 x 40 |
length |
EHT 100 (pair) |
100 x 70 x 40 |
cross |
EHT 150 |
150 x 75 x 25 |
cross |
EHT 300 |
300 x 75 x 25 |
cross |
Lamella justification | different sizes available | length + cross |
The lamella support blocks are the perfect complement to the magnetic clamping plates. The magnetic force is guided from the clamping plate to the workpiece through the arrangement of steel and brass elements. Due to the machined shapes, complex workpieces can be magnetically clamped. Various working heights can be built-up as well.
The surface of the magnetic clamping plate is additionally protected against accidental damage through, for example, deep drilling.
Other pole extension or pole placement plates are available on request.
The permanent magnet system is moved inside when it is switched on and off, e.g. by operating a lever. It consists of a pole plate and a magnet body. When switched off, the pole plate is not exactly congruent with the magnet body, which leads to a magnetic short circuit (Figure 1). When switched on, the pole plate is congruent with the magnet body and the magnetic circuit can only be closed via the workpiece (see Figure 2).
Features:
All Assfalg electro-permanent magnetic chucks are equipped with a maximum of poles in the relationship to the size of the chuck.
If you review a price comparison, it is important for you, to analyze the clamping force of the chuck, because not the size of the chuck is important for the clamping force but the numbers of the poles are crucial for the clamping force of the magnetic chuck. It can mean that you will have bigger price differences by the same size of the magnetic chucks.
Do you have any questions? We will be happy to advise you individually.
You have already informed yourself about magnetic clamping, but for you are the advantages of the different Electropermanent Square Pole Chucks not yet understandable? Before you decide for a Electropermanent Magnetic Chuck, represented on the market, please ask you the following questions:
The electropermanent magnetic chuck from Assfalg Magnaslot is ideally suited for clamping of small and big work pieces for milling operations. Pole extensions, easily fixed on the surface of the magnetic chucks, guaranted a clamping without distortion even for uneven work pieces. The full steel body, patented and only available by Assfalg-magnets, offers an ideal protection against external influences like hot chips and coolant. If you work very big work pieces, you will get optionally a 4 channel controller, making a simultaneous switching of max. 4 magnetic chucks.
Take the next step and recognise the benefits of precision steel solutions for your company.
Or simply give us a call:
+49 (0)7171 92505-0