Solid carbide deburring and radius cutter

Solid carbide deburring and radius cutter for faceting and edge rounding.

Back to Overview

Cutter type
Diameter: 6 - 20 mm
Radius: 0.2 - 7.0 mm
Point angle
Materials

Dimensions

Here you will find a selection of our best-selling milling cutters (all milling cutters can be found in the PDF file):

	Field of application	Description
Chamfers cutter (without bore)	Steel, Alu	Ø 6 mm, o. B., Z = 3, Point angle 90°, uncoated, d = 1,0 mm
	Steel, Alu, Plastic	Ø 6 mm, o. B., Z = 3, Point angle 90°, uncoated, d = 2,0 mm
	Steel	Ø 6 mm, o. B., Z = 5, Point angle 90°, coated, d = 1,0 mm
Chamfers cutter (with bore)	Steel, Alu	Ø 6 mm, m. B., Z = 3, Point angle 90°, uncoated, d = 2,5 mm for FZ 2,6, FK 3, FK 4 + FK 5
	Alu	Ø 6 mm, m. B., Z = 3, Point angle 90°, uncoated, d = 3,9 mm for FK 4, FK 5
	Steel	Ø 6 mm, m. B., Z = 5, Point angle 90°, coated, d = 3,9 mm for FK 4, FK 5
	Stainless steel	Ø 6 mm, m.B., Z = 5, Point angle 90°, coated, d = 3,9 mm for FK 4, FK 5
	Steel, Alu	Ø 10 mm, S 6 mm, m.B., Z = 3, Point angle 90°, uncoated, d = 2,5 mm for FK 3, FK 4, FK 5, FK 6
	Alu	Ø 10 mm, S 6 mm, m. B., Z = 3, spiral-toothed, Point angle 90°, uncoated, d = 3,9 mm for FK 4, FK 5, FK 6
	Steel	Ø 10 mm, S 6 mm, m. B., Z = 6, Point angle, coated, d = 3,9 mm for FK 4, FK 5, FK 6
	Stainless steel	Ø 10 mm, S 6 mm, m.B., Z = 5, Point angle 90°, coated, d = 3,9 mm for FK 4, FK 5, FK 6
	Steel <65 HRC	Ø 10 mm, S 6 mm, m. B., Z = 20, cross-toothed, Point angle 90°, coated, d = 4,9 mm for FK 5, FK6
	Steel	Ø 12 mm, m.B.,Z = 4, spiral-toothed, Point angle 90°, coated, d = 5,8 mm for FK 6
Chamfers cutter (with inserts)	-	SP5409-12-FK16, Z = 2, for reversible plate X.9
Radius cutter (without bore)	-	R 1,5 mm - Ø 6 mm, o.B., Z = 3, uncoated, with FZ 2
Radius cutter (with bore)	Steel	R 1,5 mm - Ø 6 mm, o.B., Z = 3, uncoated, with FZ 2
	Alu	R2,0 mm - Ø 10 mm,S 6 mm, m.B., Z = 3, spiral-toothed, uncoated, d = 3,9 mm for FK4
	Alu	R3,0 mm - Ø 10 mm, S 6 mm, m.B., Z = 3, spiral-toothed, uncoated , d = 3,9 mm for FK4
	Steel	R3,0 mm - Ø 10 mm, S 6 mm, m.B., Z = 5, coated, d = 3,9 mm for FK4
Hobs	Steel, Alu	Ø 6 mm, S 6 mm, m.B., Z = 4, spiral-toothed, Point angle 180°, one-sides, for FK 6 for flush milling
Prism cutter (for fixed prism)	Alu	Ø 8 mm, o.B., Z = 3, Point angle 180°, uncoated
	Steel, Stainless steel	Ø 10 mm, o.B., Z = 3, Point angle 180°, uncoated
Prism cutter (for sliding carriage)	Steel, Alu	Ø 6 mm, o.B., Z = 3, Point angle 180°, uncoated
Backwards cutter	Steel, Stainless steel	Ø 14 mm, S 6 mm, Z = 6, Spitzenw. 90°, coated, with FK10 x 6, use only with cover cap 50616
Guide ball bearings	Guide ball pins	Ø 2,6 mm
	Guide ball bearings	Ø 3,0 mm
	Guide ball bearings	Ø 4,0 mm
	Guide ball bearings	Ø 5,0 mm
	Guide ball bearings	Ø 6,0 mm
	Guide ball bearings	for thin sheets, 6 mm / W2,5 x 73 mm
	Guide ball bearings	for thin sheets, 8 mm / W2,5 x 73 mm

Show full dimensions

Our wide range of tools includes various solid carbide deburring and radius cutters. The solid carbide cutters are available for the processing of different chamfer angles and radii. For contour machining with the solid carbide cutters, ball bearings with Ø 3 mm, Ø 4 mm, Ø 5 mm, Ø 6 mm or Ø 8 mm are used. Pointed contour cutters are used in combination with guide fingers or stop rulers on all common edge and contour milling machines. Of course, they can also be used on CNC milling machines. The advantage is the machining of fine contours.

Data sheet

Back to Overview